Top Repiping Contractors in Tulsa, Oklahoma Ranked

If you're a homeowner in Tulsa, noticing low water pressure, discolored water, or frequent leaks, your home's aging plumbing system may be signaling the need for a complete overhaul. Repiping, or whole-house pipe replacement, is a significant but often necessary project that replaces all the old water supply lines in your home with new, reliable materials. This process ensures clean water, consistent pressure, and protects your property from costly water damage. This guide will help you understand what a full home repipe entails, the options available in Tulsa, and how to find qualified local professionals to handle this critical job.

Sargent's Plumbing & Drain

605 W Oakland Pl, Broken Arrow, OK 74012

Sargent's Plumbing & Drain is a licensed plumbing company serving Tulsa, OK, and the surrounding areas. With over 25 years of combined experience, they offer a wide range of plumbing services including water heater repair and installation, drain cleaning, sewer line repair, leak detection, repiping, gas line installation, toilet repair, and garbage disposal repair. The company provides 24/7 emergency plumbing support without additional fees and backs their repiping work with a 25-year warranty. They focus on honest communication and reliable workmanship, aiming to complete jobs correctly the first time.

5.0

140 Reviews

O'Connor Plumbing

tulsa

O'Connor Plumbing is a family-owned plumbing company serving Tulsa, OK, with over 30 years of experience. They provide a wide range of residential and commercial plumbing services, including water heater repair and installation, drain and sewer cleaning, leak detection, repiping, gas line installation, and garbage disposal repair. The company is equipped to handle complex plumbing issues and offers same-day emergency services for urgent problems like burst pipes and severe leaks. Their team uses advanced equipment and stands behind their work with strong warranties, often providing personalized service directly from the owners.

5.0

138 Reviews

Spot On Plumbing of Tulsa Plumbers

1911 W Reno St, Broken Arrow, OK 74012

Spot On Plumbing of Tulsa Plumbers provides a range of plumbing services in Tulsa, OK, including water heater repair, drain cleaning, leak detection, repiping, and gas line installation. They serve Tulsa and surrounding areas such as Broken Arrow, Catoosa, Sapulpa, Owasso, Sand Springs, Bixby, and Glenpool. The company offers emergency plumbing services and specializes in slab leak repairs. Spot On Plumbing is veteran owned and operated, and they back their work with a two-year parts and labor warranty as well as a two-week backup guarantee on drain cleaning.

4.9

2.0k Reviews

American Home Pros

6020 W 55th St Unit 3, Tulsa, OK 74107

American Home Pros is a veteran-owned plumbing and HVAC company based in Tulsa, OK. They provide a range of services including water heater repair and installation, drain cleaning, leak detection, and repiping. Their team is equipped with the latest tools and technology to handle plumbing and HVAC needs efficiently. The company also offers maintenance memberships to help prevent plumbing and HVAC issues before they arise. American Home Pros emphasizes honest, upfront service and is committed to delivering long-term comfort for homes in the Tulsa area.

4.9

1.1k Reviews

Acts Of Service Plumbing Tulsa

5152 S 94th E Ave, Tulsa, OK 74145

Acts Of Service Plumbing Tulsa is a locally owned plumbing company serving Tulsa, OK, and nearby areas including Owasso, Broken Arrow, Bixby, and Jenks. With over 30 years of experience, they offer a range of plumbing services such as water heater repair and installation, tankless water heater services, drain cleaning, leak detection, repiping, gas line installation, and toilet repair. The company emphasizes trustworthy service rooted in Christian values and maintains a team of certified plumbers dedicated to clear communication and careful work. Acts Of Service Plumbing provides 24/7 emergency plumbing services to address urgent needs promptly.

4.9

700 Reviews

See more providers in Tulsa, OK

Understanding the Need for a Whole-House Repipe

Older homes in Tulsa, particularly those built before the 1970s, often contain galvanized steel pipes. Over decades, these pipes corrode from the inside out, leading to a host of problems. Rust buildup severely restricts water flow, causing low pressure at your faucets and showerheads. You might see brown or reddish water, especially when you first turn on a tap. More critically, corroded pipes become weak and prone to pinhole leaks, which can cause hidden water damage inside your walls and ceilings. If you're experiencing these issues in multiple fixtures, a spot repair won't solve the systemic problem. A full pipe replacement is the definitive solution to restore your home's plumbing integrity, water quality, and peace of mind for decades to come ^{1 2}.

The Repiping Process: A Step-by-Step Overview

A professional whole-house repipe is a structured project managed by licensed plumbers. Understanding the steps can help you know what to expect and prepare your home.

1. Inspection and Planning The process begins with a thorough assessment. A plumber will inspect your current system, identify all fixtures, and map out the most efficient routes for the new piping. This stage includes obtaining any necessary permits from the City of Tulsa, ensuring the work meets all local building codes ^{3 4}.

2. Access and Demolition To remove the old pipes and install new ones, technicians need access inside your walls and ceilings. They will strategically cut small access holes-typically at joints and fixture locations-to minimize the impact. The old galvanized or copper pipes are then carefully removed ^{3 5}.

3. Installation of New Piping This is the core of the project. The new supply lines, either PEX or copper, are run through the open spaces in your home's framework. They are connected to the main water line and routed to every sink, toilet, shower, and appliance. Proper support and insulation are installed as needed ^{4 6}.

4. Pressure Testing and Inspection Before closing up the walls, the entire new system is pressurized with air or water and meticulously checked for any leaks. This critical quality control step ensures the installation is sound. The system may also be inspected by a city official if required by the permit ^{3 7}.

5. Restoration Once the plumbing passes inspection, the restoration phase begins. The access holes in your drywall and ceilings are patched, textured, and primed. While repiping crews are plumbers, not finish carpenters, they will return your walls to a "patch-ready" state, leaving you to arrange painting to match your existing décor ^{3 6}.

Choosing Your Piping Material: PEX vs. Copper

The choice of material is one of the most important decisions in a repiping project, affecting cost, longevity, and performance. In Tulsa, the two primary options are PEX and copper.

PEX (Cross-Linked Polyethylene) PEX has become the overwhelmingly popular choice for modern repiping projects. This flexible, plastic tubing is highly corrosion-resistant and can handle Tulsa's water conditions well. Its flexibility allows it to be snaked through walls with far fewer fittings and joints than rigid pipe, which reduces potential leak points and speeds up installation. PEX is also more affordable than copper, both in material and labor costs, and it offers slight insulation benefits ^{1 3 8}.

Copper Copper piping has a long, proven history of durability and is still used and respected today. It offers a very long lifespan and is resistant to UV light (unlike some plastics). However, it is a rigid material, requiring more fittings and soldering, which increases labor time and cost. Copper is also significantly more expensive than PEX on a material basis, and its price can be subject to market fluctuations ^{1 7}.

CPVC While sometimes mentioned, CPVC (Chlorinated Polyvinyl Chloride) is less common for whole-home repipes today. It is a rigid plastic that requires glue at every joint and can become brittle over time. Most Tulsa plumbing professionals recommend PEX over CPVC for a whole-house replacement due to PEX's superior flexibility and reliability ⁸.

Timeline: How Long Does a Tulsa Repipe Take?

For an average-sized Tulsa home, you should plan for the active repiping work to take 3 to 5 days ^{2 9}. The crew will typically work during standard business hours. A key consideration for daily life is that reputable plumbers will make every effort to restore water service each evening, so your household isn't without water overnight. Factors that can extend the timeline include the size of your home (e.g., multi-story or large square footage), the number of bathrooms, and the complexity of the pipe routing. The restoration phase (drywall patching) occurs after the plumbing is complete and inspected, and painting is a separate step you can schedule at your convenience.

Cost Considerations for Repiping in Tulsa

The investment in a whole-house pipe replacement varies based on several key factors. Most projects in the Tulsa area fall within a range of $4,500 to $15,000 ^{1 2 10}.

Here's what influences the final price:

• Home Size and Layout: The total linear feet of pipe needed is the biggest driver. A larger home with more bathrooms, kitchens, and wet bars will cost more than a smaller one.
• Number of Fixtures: Each sink, toilet, shower, washing machine hookup, and outdoor spigot adds to the labor and materials.
• Material Choice: As discussed, a copper repipe will be at the higher end, often 20-50% more than a PEX system, due to material costs and more intensive labor ^{1 11}.
• Labor and Access: The ease of running pipes through attics, crawlspaces, or walls affects labor time. Difficult access can increase costs.
• Permits and Restoration: City permit fees and the extent of drywall repair needed are also factored into estimates.

It's crucial to get detailed, written estimates from multiple licensed plumbers. A reputable contractor will provide a breakdown that includes all labor, materials (specifying the type/brand of pipe), permit fees, and restoration work.

Finding the Right Professional for the Job

A whole-house repipe is a major investment in your home. Choosing the right contractor is paramount.

• Verify Licensing and Insurance: Always confirm the plumber holds a valid license from the state of Oklahoma and carries both liability and worker's compensation insurance.
• Check Local Reputation: Look for established Tulsa companies with strong reviews on independent platforms. Ask for local references you can contact.
• Get Detailed Estimates: Avoid vague quotes. Insist on a detailed, written scope of work that specifies the pipe material brand (e.g., Uponor PEX-A, Type L Copper), the warranty offered on both parts and labor, and a clear project timeline.
• Ask About the Crew: Will the same experienced crew be on-site for the duration? How do they protect your home and clean up at the end of each day?
• Understand the Warranty: A quality repipe should come with a substantial warranty, often 10-25 years on the piping itself and several years on the installation labor.

Frequently asked questions

Sources