Top Gas Line Plumbing Companies in Marietta, Georgia Ranked

Installing or repairing a gas line is a critical home improvement project that directly impacts the safety and functionality of your home. Whether you're adding a gas fireplace, upgrading to a gas stove, or addressing a leak, proper gas piping work requires strict adherence to local codes and safety protocols. This guide explains the process, local requirements, and key considerations for Marietta homeowners, helping you understand what's involved and how to connect with qualified local specialists for your project.

True Plumbing

2650 Pleasantdale Rd, Doraville, GA 30340

True Plumbing is a plumbing service provider based in Atlanta, GA, offering a wide range of services including sewer camera inspections, water heater repair and installation, drain cleaning, sewer line repair, trenchless sewer repair, leak detection, repiping, gas line installation, and toilet repair. They use advanced tools for leak detection and provide trenchless methods for sewer repairs, helping maintain efficient plumbing systems. Established in 2014, True Plumbing focuses on building lasting customer relationships by educating clients and ensuring peace of mind with their work.

5.0

1.1k Reviews

Pike Plumbing

4341 Stilesboro Ln NW, Kennesaw, GA 30152

Pike Plumbing is a family-owned plumbing company serving Atlanta, GA, and surrounding areas since 1984. They provide residential and commercial plumbing services including water heater repair, drain cleaning, sewer line repair, gas line installation, and hydro jetting. Known for handling waterline and sewer line work with a lifetime workmanship warranty, Pike Plumbing offers 24/7 emergency plumbing services to address urgent issues at any time.

5.0

368 Reviews

Honeycomb Plumbing

Atlanta, GA

Honeycomb Plumbing is a residential plumbing company serving Atlanta, GA, and surrounding counties including Cobb, Fulton, Dekalb, and Gwinnett. Founded this year, the company brings a decade of expertise to a wide range of plumbing services such as water heater installation and maintenance, drain cleaning with camera inspections, water softener and filtration system installation, sump pump repairs, gas line installation, and full repiping projects. They offer 24/7 emergency plumbing services to address urgent issues and prevent property damage.

5.0

168 Reviews

Stars and Pipes Plumbing Atlanta

1014 Parkview Way SW, Lilburn, GA 30047

Stars and Pipes Plumbing Atlanta is a veteran-owned, family-operated plumbing company serving Atlanta, GA, and surrounding counties including Gwinnett, Fulton, and DeKalb. They provide a range of plumbing services such as sewer camera inspections, water heater repair and installation, water softener installation, drain cleaning, hydro jetting, sewer line repair, and gas line installation. Their licensed plumbers use advanced equipment like hydro-jetting and video inspection to diagnose and resolve drainage issues efficiently. With over 10 years of experience, Stars and Pipes Plumbing Atlanta offers certified gas line installations that meet local safety standards and codes.

5.0

131 Reviews

Plumb Works Inc.

3116 Chestnut Dr #101, Atlanta, GA 30340

Plumb Works Inc. is a plumbing company serving the Atlanta, GA area since 1989. They provide a wide range of residential, commercial, and underground plumbing services including sewer camera inspections, water heater repair and installation, sump pump repair, drain cleaning, hydro jetting, sewer line repair, trenchless sewer repair, leak detection, repiping, gas line installation, toilet repair, and garbage disposal repair. The company offers specialized sewer line camera inspections to identify underground pipe issues and provides detailed reports with repair recommendations. Plumb Works also offers emergency plumbing services to address urgent plumbing problems promptly.

4.9

1.8k Reviews

See more providers in Marietta, GA

Understanding Gas Line Projects in Marietta

Natural gas is a popular and efficient energy source for heating, cooking, and powering appliances. However, working with gas piping is not a typical DIY task. In Marietta, all gas line installation, replacement, and repair work must comply with the City's plumbing and fuel gas codes. This ensures systems are safe, reliable, and won't pose a hazard to your household or property. Projects can range from a simple appliance hookup to a complex new line run from the meter to an outdoor kitchen or fire pit.

The core principle is safety. A professional gas fitter understands how to size pipes correctly, select approved materials, and perform rigorous leak testing. They also handle the essential step of securing the required local permits and scheduling mandatory inspections, which are your assurance that the work meets all safety standards.

The Step-by-Step Process for Gas Line Work

A professional gas line installation or repair follows a structured sequence to ensure safety and code compliance from start to finish.

1. Assessment and Planning

The first step is a detailed site evaluation. A technician will determine the best route for the new gas piping, calculate the required pipe size based on the appliance's BTU demand and the length of the run, and select the appropriate materials. Common materials include black iron pipe, which is rigid and durable, and Corrugated Stainless Steel Tubing (CSST), which is flexible and often easier to install in existing structures. This planning phase also identifies whether trenching for an underground line is necessary.

2. Securing Marietta Permits

Before any work begins, a plumbing permit must be obtained from the City of Marietta. Professionals typically handle this process, which involves submitting application details through the SagesGov.Com portal and paying the associated fee. Permit fees can vary but are a non-negotiable part of any gas piping project, ensuring the work is added to the city's inspection schedule.

3. Installation and Trenching

For indoor runs, technicians will carefully route pipes through walls, floors, or ceilings. For outdoor lines supplying grills, pool heaters, or lanterns, trenching is required. This involves digging a narrow ditch to the necessary depth (as per code), which can cost between $4 to $12 per linear foot. The pipe is then laid, connected with secure fittings, and run to the appliance location via a riser. The line is connected to the home's main gas supply at the meter ^{1 2}.

4. Pressure Testing and Inspection

This is the most critical safety step. Once the pipe is installed but before it is connected to the appliance, the system is pressurized with air for a test. In Marietta, new gas lines must hold a pressure of 15 PSI for a set period to prove there are no leaks. A city inspector will visit to witness this test and verify the installation meets all code requirements. Only after this "rough-in" inspection passes can the gas meter be set or reconnected and the appliance finally hooked up ³.

5. Final Appliance Connection and Check

After passing inspection, the professional will make the final connection to your appliance-such as a stove, dryer, or furnace-and conduct a final leak check with a gas leak solution or detector at all connection points. They will then ensure the appliance is operating correctly and safely before considering the job complete.

Key Safety Considerations and Best Practices

Gas line work is governed by one overriding priority: preventing leaks and ensuring safe operation.

• Professional Installation is Non-Negotiable: The risks of an improper gas line installation-including fire, explosion, and carbon monoxide poisoning-are severe. Licensed professionals have the training, tools, and knowledge of local Marietta codes to do the job safely and correctly ⁴.
• Leak Detection: Every household should be familiar with the signs of a gas leak. Natural gas is odorless, but a distinctive rotten egg smell (mercaptan) is added as a warning. You may also hear a hissing sound near a gas line or appliance. If you suspect a leak, leave the area immediately and call your gas company or 911 from a safe distance ⁵.
• Proper Pipe Sizing: A pipe that is too small for the appliance it serves will result in poor performance (e.g., a weak flame on a stove) and can be a safety issue. Correct sizing is a calculation based on BTU load, pipe length, and other factors that a professional will perform ^{6 7}.
• Material Matters: The choice between black iron and CSST isn't just about cost. Local code, the installation environment (indoor vs. underground), and the specific appliance requirements will dictate the suitable material. Your contractor will recommend the best, code-compliant option for your project ⁸.

Understanding Costs for Gas Line Services in Marietta

The cost of gas line work can vary widely based on the project's complexity, length of pipe needed, and difficulty of the installation path. Here is a general breakdown of potential costs you might encounter in Marietta:

• Permit Fees: These are required and typically range from $50 to over $500, depending on the project's scope.
• Trenching: For underground lines, expect to pay between $4 to $12 per linear foot for the digging and backfilling work.
• Appliance Hookup: Connecting a single appliance like a stove or dryer to an existing gas line may cost between $100 to $300.
• Leak Repair: Diagnosing and repairing a leak in an accessible area can range from $150 to $750, with costs increasing if walls or floors need to be opened ⁹.
• Pressure Testing & Inspection: Some professionals may include this in their quote, but standalone testing or re-inspection fees can be in the range of $75 to $150 ¹⁰.

For a complete new gas line installation from the meter to an appliance, you are looking at a total project cost that combines many of these elements. Always get detailed, written estimates from licensed professionals that outline all expected costs, including permits and inspections.

Local Marietta Regulations You Need to Know

Marietta has specific procedures to ensure gas work is done safely:

• Permitting: All gas line installations and repairs require a permit applied for through the SagesGov.Com website.
• Inspections: At least one inspection is mandatory. The "rough-in" inspection, where the pressure test is performed, must be passed before the gas company will set the meter or turn the gas back on. A final inspection may also be required.
• Code Compliance: Installations must follow the current International Fuel Gas Code and Georgia Amendments. This covers everything from pipe material and sizing to support spacing and drip leg installation at appliances ^{11 12}.

Working with a professional who is familiar with these local requirements is the best way to ensure a smooth process from permit to final approval.

Frequently asked questions

Sources